Scout
Ute-Mount
Need a bit more room?
The Scout is your go-to, offering more space, and comfort, with an easy pop-top set up.
Slide On Camper Inclusions
- Slightly longer 2.5m floor (ideal for single cab utes) offering more comfort and space
- Also available in 2.1m, with unique floorplans for each size
- Automatic pop-top for easy setup
- East-west queen bed and additional single sofa bed
- Interior sink and slide-out stainless steel kitchen
- Built for the long haul with extra water and power
- 77L stainless steel water tank
- Thetford chemical toilet
- TV and Bluetooth player for entertainment
- Four 12v electric jack legs for convenience
2.5m Scout
2.1m Scout
2.1m Scout
Specifications
Dimensions
- 2.5m: (L) x 2.1m (W) x 1.9m (H) or 2.25m (H) when top open
- 2.1m: (L) x 2.1m (W) x 1.9m (H) or 2.75m (H) when top open
- Overhead Total: 3.95m (L)
- Dry Weight: 850KG
- Berth/Sleeps: 3
- Suits single/extra cab ute or dual cab truck
External Inclusions
- Two-layer aluminium composite panel
- Removable side entry ladder
- 2.5m manual awning
- Manual pop top
- Slide out cooker and sink (2.5m)
- Slide out cooker and bench top (2.1m)
- 240v shore power connection
- TV antenna
Internal Inclusions
- Queen bed (east-west) 2000mm x 1400mm
- Additional single sofa bed/seating 2,000mm x 770mm
- Internal stainless steel sink
- LED skylight
- Thetford chemical toilet (electromotion)
- 14-inch TV (12V)
- Dometic 12v refrigerator
- Under seat reverse cycle (2.5m) or rooftop AC (2.1m)
- Bluetooth stereo & 2 internal and external speakers
- Truma gas/electric hot water cylinder (2.5m)
- Fogatti gas instantaneous hot water (2.1m)
- 77L stainless steel water tank with electric pump
- Under bench storage cupboards
- Fire extinguisher
Gas & Electricity
- 30amp DC battery charger
- 2 x 100AH battery
- 2000W inverter
- 20A solar panel controller
- 200W solar panel
- 4.5kg gas cylinder
- Two burner gas stove
- Truma 20L gas hot water heater (2.5m)
- Fogatti gas instantaneous hot water (2.1m)
- Anderson plug
- 240v inlet
Vehicle & Mounting Requirements
This slide-on camper is designed to be mounted to a ute (or truck) which may need to be upgraded in the case of a ute. A GVM upgrade is highly advised for all 1 tonne utes. You need to consider new tyres to cope with the weight and tie-down points on your vehicle. Whilst we supply the mounting hardware, fitting is done by prior arrangement.
From $48,500
showtime special
Download the spec sheet for all the details.
Image Gallery
